PBFASHOW/PBMASHOW - Pex utils to display an ansi file for a specific file
or message area.
(C)1994 G.Smith  - Another fine HomeGrown Pex!

Installation
-------------

1. Place PBFASHOW.PEX/PBMASHOW.PEX in your \proboard\pex directory
2/ Edit/create suitable ANS/ASC/AVT files for your file/message areas.
3. Place PBFASHOW.INI/PBMASHOW.INI in your \PROBOARD\PEX directory and edit
   it to suit the specific file area.

PBFASHOW :

   ie  FileArea1 = 50       <-- File area number from PROCFG of area where
                                you wish to display ansi file.
       DispFile1 = PROBOARD <-- Name of ASC/ANS/AVT file to display when
                                user changes to this file area.

PBMASHOW :

   ie  MsgArea1 = 23        <-- Message area number from PROCFG of area where
                                you wish to display ansi file.
       DispFile1 = ADULT    <-- Name of ASC/ANS/AVT file to display when
                                user changes to this message area.


4. Create a second entry in the file menu setup for 'Area Change'
_after_ the existing are change entry. The second entry must have the
same hotkey(s) as the existing entry(s), but will be a type 60- Run
Proboard SDK File type menu entry.

eg.

   A|;                    |Select New FileArea   | *
   A|;                    |Run ProBoard SDK File | PBFASHOW

or if you are using ALIST...

   A|;                    |Run ProBoard SDK File | ALIST F -*,+[1..15]...etc
   A|;                    |Run ProBoard SDK File | PBFASHOW

Do same for PBMASHOW....

It is important that the PBFASHOW.PBMASHOW entry comes after your existing area
change entry(s). That way it is run _after_ the person has changed to the file
or message area.

Copyright Notice
----------------

PBFASHOW/PBMASHOW are 'donorware'. You are under no obligation to pay for
these programs, but are welcome to send a donation of $US10 to keep the
author's spirits up..:) Feedback and any donations will help to ensure
the continued development of HomeGrown pex's.

The author will take no responsibility for any damage that may be caused
by the use, proper or improper, of this program. The only guarantee given
is that it will use some hard disk space.

Contacting the Author
---------------------
BBS: DataBus/2                 Fidonet:  3:637/103    AceNet: 133:666/15
     Ph. +61-53-362-775        TriNet : 42:8699/51
     24hrs  V.FC

Internet: gsmith@nova.ballarat.edu.au

Snail Mail:   Gary Smith,
              P.O. Box 192,
              Sebastopol,
              Vic.   3356
              Australia

