


 
 ķ
  FeSetup for ProBoard                          Version 1.02              
                                                (C)1996 Fe-line Software  
 ͼ
  



                        FeSetup for Fe-line Software PEXs.
                                18th November 1996


                           Written by Faye Pearson.
                        Docs written by Sarah Pearson.





FeSetup is a DOS .EXE that is required for the installation and/or upgrading
of all Fe-line Software PEXs dated after the 30th May 1996.

FeSetup was introduced to make the installation of a PEX much simpler and
quicker.  It also removes the problem of some of our PEXs failing to run
under ProBoard 2.15 when they are compiled with the 2.12 SDK.  

FastLog/IEMSI 3.15 was the first PEX to utilise FeSetup.

Please keep this FeSetup archive in a safe place, as it is the key to
installing all of our PEXs.

Ŀ
 FeSetup :                                               CREDITS and USAGE 


FeSetup is Copyright 1996 Sarah and Faye Pearson, Fe-line Software.

This version of FeSetup is Freeware.

Ŀ
 FeSetup :                                                  HOW TO INSTALL 


After unpacking the FeSetup archive, you will find several files.

BUPDATE.EXE
This is used by FeSetup to update PEXs to the correct ProBoard SDK version.

FESETUP.EXE
This is the actual FeSetup DOS executable.  FeSetup requires a .PKG file to
be able to function.  The .PKG file is contained in each PEX archive.

Unpack a Fe-line Software PEX that uses FeSetup.  (All PEXs released after
30th May 1996 will require the use of FeSetup).

You should find a .PKG file and a few text files.

To initialise the installation/upgrade process, type :

FESETUP <package name without the extension>

eg,  if you are installing FastLog/IEMSI 3.15 (or later) then type

     FESETUP FASTLOG      <press enter>

The screen will clear and the installation will begin.

Follow *all* the onscreen prompts and the installation/upgrade will be
quick and simple.

Use ALT and the first letter of the button that you wish to press.
eg, ALT-C for Continue, ALT-I for Install and so on...

You can also use TAB to shift forward through the available buttons and use
SHIFT-TAB to shift backwards.  Pressing ESCAPE at any time will immediately
exit FeSetup.

if you do encounter any problems with FeSetup (or any PEX) then please contact
us thorugh any of the ways listed below.

Thank you for trying FeSetup and please remember to keep this archive or you
won't be able to install any of our PEXs.
     
-----

This EXE is supplied "as is" and we will not be held responsible for any
damage caused by this EXE.  It works on our BBS ok, so that is the only
guarantee given :-)

If you have any bugs, comments or suggestions then you can contact us by :

  Fe-line      +44-181-548-9620, V34/VFC
  2:254/278    FidoNet
  752:752/0    The Global ProBoard Network
  173:902/300  DqP
  fe-line@proboard.com

You can find the latest version of FeSetup and all our ProBoard Software on
our WWW and FTP sites as well as on our BBS.

                http://www.fe-line.demon.co.uk


Sarah and Faye
Home of Fe-line Software.
