
----------------------The Adept Telnet Front End--------------------------

How to Set up adepts front end with telent on the internet  to adept2.com

First you must take the bbs down and do a command line.
adept.exe  /nodes /3 <-how Many nodes you want here /setup

lets say  the line is for 4 nodes 3 and 4 are going to be on the internet.
----------line 3 settings---------------------
adept only no vmodem.exe for this node .
Do this
adept.exe /nodes 4 /setup
goto node 3 and click on config-active line-general settings
click on internet timings
click on use socket port
click on use telent port
line 3 is  now ready.



----------line 4 settings with vmodem ---------------------
goto node 4 and click on config-active line-general settings
click on internet timings

Goto dial pre and add this to your ATDT#  <----yes the pound sign here.
set up vmodem in you config.sys something like this.

port name  com4 <--- this will vary depending on you sio setups.

device=c:\sio\sio.sys (com1:115200,,4,-) (com2:115200,,3,-) (com3:115200,,5,-)
(com4,internet,none) (com5,internet,none) (com6,internet,none)
my ports for vmodem are com4 5 and 6

Note Before restarting the bbs run vmodem.exe in another os/2 window first.

Now if you have qnode do this in qnode.cfg under
Dial cost
1-954-475-0454 206.142.183.65
;old phone number convered to the ip# this way.


Now if you want you can use sob110.zip nodelist editor to edit it directly
into the editor for 1:369/110 to the ip# instead .
sob110.zip in on our ftp site at adept2.com.

Call up your providor first then, bring the bbs down after you have
done everthing and restart the bbs back up making sure you have vmodem
running in another window.

Goto node 3 or 4 and poll 1:369/110 if set up right you will connect
to us . Now you ready for a telnet front end internet system.
You can even freq files from me this way.


Don't ask me about fast list I done use it.
                                            Bill Seward

